General Data:
| Parameters(25°C) Model | SCD6-10mA | SCD6-20mA | SCD6-50mA | SCD6-100mA | ||||||||
| Nominal Rms Current (Ipn) | ±10mA DC | ±20mA DC | ±50mA DC | ±100mA DC | ||||||||
| Measuring Range (Ip) | 2* Ipn | |||||||||||
| Load resistance Rmax | ≥10kΩ | |||||||||||
| Output Voltage | ±5V | |||||||||||
| Working voltage | ±12V~±15V(±5%) | |||||||||||
| Accuracy @ Ta=25°C | ±1% FS | |||||||||||
| Linearity @ Ta=25°C | ±0.5% FS | |||||||||||
| Input Offset Voltage | <±50mV | |||||||||||
| Thermal drift of Vo | < ±1mV/°C | |||||||||||
| Resolution | 10uA | |||||||||||
| immunity (to external interference) | < ± 5mV When H=50A DC/m | |||||||||||
| Withstand voltage | 3kVrms/50Hz/min | |||||||||||
| Current consumption | <13mA | |||||||||||
| Operating temperature | -10~+75 °C | |||||||||||
| Storage temperature | -25~+80 °C | |||||||||||
Notes:
1. Size error: ±0.5mm;
2. Primary aperture: φ18mm;
3. Fastening hole: ○ 4.8*4.9mm*2;
4. Output terminal: 2EDGVC-5.08-4P;
5. The IP indication direction is the positive direction of the current, and the OFS is the zero adjustment;
6. Incorrect wiring may cause damage to the sensor;
7. The zero voltage of the sensor can be adjusted appropriately according to the needs of users;
1.DC leakage current sensor adapt non-contact measurement, it is develop on thebasis of the principle of zero magnetic flux modulation and magneticmodulation, it can measure small DC current MA level’s isolation in perforationmeasurement.
2.Zero position output of the sensor output can be adjusted according to userneeds.
3.We can customize different current and voltage output according to user'srequirements.
Caution: This product is precision measuring device, please handle with care!