Technical Data:
| Parameters(25°C)Model | SCY10- | ||||||
| 800A | 1000A | 1200A | 1500A | 2000A | 2500A | 3000A | |
| Nominal Rms Current (Ipn) | ±800AT | ±1000AT | ±1200AT | ±1500AT | ±2000AT | ±2500AT | ±3000A |
| Measuring Range (Ip) | 2*Ipn | ||||||
| Load resistance Rmax | ≥10kΩ | ||||||
| Output Voltage | ±4V | ||||||
| Working voltage | DC ±12V or ±15V(±5%) | ||||||
| Accuracy @ Ta=25°C | ±1% | ||||||
| Linearity @ Ta=25°C | ±1% | ||||||
| Withstand voltage | 3kVrms/50Hz/min | ||||||
| Offset Voltage | < ±30mV | ||||||
| Offset temperature characteristics | < ±0.1%/°C | ||||||
| Thermal drift of Vo | < ±1mV/°C (If=0) | ||||||
| Hysteresis offset | < ±25mV (if=F.S.) | ||||||
| Response time | < 7uS | ||||||
| Bandwidth (-3db) | ± DC - 4KHZ | ||||||
| Current consumption | <±23mA | ||||||
| Operating temperature | -40~+85 °C | ||||||
| Storage temperature | -40~+85 °C | ||||||
Notes:
1. Size error: ±1mm;
2. Primary aperture: □104*40mm;
3. Output terminal: 2EDGVC-5.08-4P;
Mating plug: 2EDGK-5.08-4P;
4. The IP indication direction is the positive direction of the current, OFS is the zero adjustment, and GIN is the output regulation;
5. Incorrect wiring may cause damage to the sensor
Instrucations
SCY10 Series Split Core Hall Effect CurrentSensor is dual power supply hall current sensor, open loop measurement.
There is galvanic isolation between primary and secondary circuit of the sensor,it can measure DC, AC or pulse currents.
SCY10 Series 's up and down can open and close without removing the busbarline, easy to install.
Big square hole perforation, mainly measure cooper conductor current.
Features: High accuracy, low power consumption, high liability and strongoverload capacity.